Description

IC697CPX928-FE GE Programmable Logic Controller

Can be transported to all parts of the world. (Exclude areas that cannot be transported under special circumstances! )

If necessary, please contact customer service.

[service contact information]

Tel: 18059884797 (WeChat with the same number)
QQ：3095989363
Email: sales@xiongbagk.cn

Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen

① 24-hour email reply (12 hours);

③ For shipment to countries outside Asia, please contact the seller.

Module Type:	Central Processing Unit
Number of Slots:	1 (Single slot)
Current Required:	3.1 Amps
Number of Points:	12K inputs and outputs (any mix)
Serial Ports:	Three (RS-232 and RS-485)
Supports:	IC660/IC661 I/O and IC697 I/O

IC697CPX928-FE

The GE Fanuc Series 90-70 module with catalog number IC697CPX928 is a Central Processing Unit (CPU) that is used mainly to execute user program downloaded to the CPU’s memory. This CPU module is a single slot chassis that features an 80486DX4 microprocessor with speed of 96 MHz and 0.4 µs per Boolean function execution. This module is equipped with an on-board memory of 6MB battery-backed up RAM and 256KB non-volatile user flash memory where CPU firmware is also stored.

The IC697CPX928 is a Programmable Logic Controller manufactured by GE Automation and Controls. It is designed to fit into a single rack slot and comes with three built-in serial ports. A backplane mounted on the rack allows this device to communicate with several different modules. A run/stop control switch with three positions or specific software running from an attached computer is used to control the IC697CPX928. Seven on-board LED lights display operational status.

Features of this device include a 96MHz 80486DX4 microprocessor, floating point calculations, processor speeds of 0.4 microseconds for each Boolean function, 8K analog I/O, and 12K I/O of any mix. The IC697CPX928 supports several modules, including IC697 LAN interface modules and various display, coprocessor, communications, and link interface modules. IC660/61 bus controllers and IC697 discrete and analog I/O modules are also compatible with this device.

To program this device, connect it to a computer loaded with MS-DOS, Windows 95, or Windows NT. This connection is possible by way of a serial, parallel, or Ethernet interface. For Ethernet connections to the programming computer, special hardware is required. As the IC697CPX928 is programmed via software, hardware setup with DIP switches and jumpers is not required. Device configuration settings can be protected digitally via a password and physically by a keyswitch.

The IC697CPX928 provides six megabytes of user and program data memory. This memory is maintained by a lithium CMOS battery. Up to 256 kilobytes of optional flash memory (NVRAM) is also supported. Operating system firmware is stored in flash memory. Device disassembly or EPROM replacement is not required to update firmware.

In environments where temperatures reach 122 degrees Fahrenheit (50 Celsius), a fan capable of 70 cubic feet per minute (CFM) is required to prevent overheating.

The product manual contains detailed guidelines for installing the IC697CPX928. Rack power should be off before installing. The operation control switch should be in the stop position. The memory protection keyswitch should be in the off position. Place the CMOS battery into one of the battery connection slots. Insert the device into the rack and resume power.

Application industry:

Power plants, steel mills, automobiles, petrochemicals, tobacco, metallurgy

Note: Please follow the instruction manual of this product to install and debug, so as not to damage the product

Reasons for choosing us—-Seven core advantages:

Brand new imported:

All products are produced and supplied by foreign original factories

Rigorous test:

All products have been strictly tested for a long time by professional and technical personnel before delivery.

Free product consultation:

Before purchasing and after using, if you encounter technical problems with the product, we will provide you with a 24-hour service hotline for free product consultation.

One year warranty:

Brand new product is guaranteed for one year

15 days replacement:

Within 15 days, there is no reason to return or exchange for non-artificial quality problems

Order directly from the original factory abroad:

Eliminate intermediate links, minimize costs, have a large number of spot stocks, and directly supply the country

SF Express:

National SF Express Free Shipping, within the range arrives the next day

Related models

Recommended Products P/N

GE IC693MDL240	GE DS200DCFBG1BLC
GE IC693PBM200	GE MWB90-2
GE IC693ALG390	GE SELA36AT0100
GE IC670GBI002H	GE IC698CRE040
GE IC670ALG230	GE IC200CBL002
GE IC693MDL752	GE IC200PWR102B
GE IC693ALG223	GE SR469-P5-HI-A20
GE IC697ALG230	GE WESDAC D20ME
GE HE693THM884M	GE IS220PSVOH1A
GE IC693PWR330	GE IS200TBAIH1C
GE IC693MDL340	GE IS220PAICH1B
GE UR9EH	GE IS220PRTDH1B
GE DS200DCFBG1BGB	GE VMIVME-7807RC
GE IS200VVIBH1CAC	GE VMIVME-2540
GE HYDRAN M2	GE D20EME
GE 8851-LC-MT	GE 3987-5KCP39PG9710ES
GE VME-7807RC	GE IC754VSI12CTD-HH
GE IS215VPROH1BD	GE DS200IIBDG1A
GE VMIACC-5595-208	GE UR8AH
GE VMIVME-5565	GE IS200EPSMG1ABB
GE IS200VCRCH1B	GE IS220PPROS1B
GE IC200MDD843	GE IS200EPSMG1A
GE IC693CMM321	GE IS220PDIOH1B
GE IC695CPU310-GV	GE HE693ADC410
GE IC698CPE030	GE VMIVME-1150-123L
GE PQM-T20-A	GE IS215VCMIH2C
GE M2LR-00-000-0	GE IS200TREGH1B
GE IS200TPROH1C	GE 5KCP39PG
GE DS200TCPDG2B	GE IC693DNM200
GE IC200ALG322	GE IS200TRPGH1B
GE IC200MDL940	GE IS200TBTCH1CBB

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “IC697CPX928-FE GE Programmable Logic Controller”