IC698CMX016

IC698CMX016

IC698CMX016 is a GE Fanuc RX7i series control memory switch module. IC698CMX016 is a communication module for PACSystems RX7i programmable controller. The function of the PACSystems RX7i controller is to port applications from one hardware environment to another. Communication modules easily installed in these modules assist in the distribution of input, output and control. These communication modules support a range of configurations and protocols. One such module is IC698CMX016, which is a control memory switch module. IC698CMX016 facilitates information transfer between the device and the PLC. The transmission is carried out over a 2.12 gigabit fiber network. The network can host 256 nodes that are compliant with 5565 devices. The network uses reflective memory technology. These nodes are connected to each other in a daisy-loop pattern that allows the receiver at each node to connect to the transmitter. This connectivity ensures that any state change passed to one node is relayed to all other nodes without delay. The control memory Xchange module has an effective data rate of 2.12 gigabit, in addition to 16 megabytes of reflective memory to store and process data. Data transfer rates for the IC698CMX016 range from 6.2 megabytes per second to 3.2 megabytes per second, depending on the density of redundant information. The access time of the module varies between 400 and 200 nanoseconds. IC698CMX016 is mounted with a 62.5 micron core LC connector. The IC698CMX016 carries a 5-volt bus and requires a minimum current of 1.2 amps to operate.

Memory is a Memory device used to store information in modern information technology. Its concept is very broad, there are many levels, in the digital system, as long as can store binary data can be memory; In the integrated circuit, a circuit without physical form with storage function is also called memory, such as RAM, FIFO, etc.; In the system, the storage device with physical form is also called memory, such as memory bar, TF card, etc. All information in a computer, including raw input data, computer programs, intermediate runs, and final runs, is stored in memory. It stores and retrieves information at locations specified by the controller. With the memory, the computer has the memory function, can ensure the normal work. The memory in the computer can be divided into main memory (memory) and auxiliary memory (external memory) according to its purpose. There are also classification methods for external memory and internal memory. External memory is usually magnetic media or CD, etc., which can store information for a long time. The memory is a storage component on the mainboard that stores the data and programs being executed. The memory is only used to store the programs and data temporarily. If the power is turned off or disconnected, data will be lost.