The DS200TCEAG2B is an emergency overdrive plate that is part of the GE Speedtronic Mark V gas turbine control system. The DS200TCEAG1B General Electric emergency overdrive board contains a microprocessor and several programmable read-only memory (PROM) modules. Also included are three fuses, 30 jumpers, and a pair of bayonet connections. The board keeps an eye out for overspeed and flame detection trips and shuts them off if needed.

Bayonet connectors are used to connect the circuit board to the rest of the driver’s components and the circuit board. Take a moment to think about it before attaching the male bayonet connector at the end of the wire to the female bayonet connector on the circuit board.
To remove the bayonet connector, place one hand on the connector and the other on the circuit board to prevent it from bending or sliding. Remove the bayonet connection from the board’s female connector and set the cable aside until you are ready to connect it to the replacement board.

DS200TCEAG2B