Description

AVF234SF132 SUT valve actuator with spring return

Product Description

• Activation of 2-way and 3-way valves of the VQD/BQD, VQE/BQE, VUG/BUG, VUP, VUS/BUS and V6R/B6R series.
For controllers with switching (2- and 3-point) and continuous output (0…10 V, 4…20 mA)
• Spring return moves to end position in the event of a power failure/interruption or when a limit controller is activated
• Stepping motor with SAUTER Universal Technology (SUT) electronic control unit and electronic, force-dependent cut-off
• Simple assembly with valve; spindle is automatically connected after control voltage is applied (patented system)
• Automatic detection of applied control signal (constant or switched); indicated by two LEDs
• Coding switches for selecting characteristic and running time
• Type of characteristic (linear/quadratic/equal-percentage) can be set on the actuator
• Automatic adaptation to the stroke of the valve (min. valve stroke 8 mm, max. valve stroke 49 mm).
The measured stroke is saved and is not lost even in the event of a power failure
• Direction of operation can be selected via screw terminals when making the electrical connection
• Crank handle for external manual adjustment with motor cut-off and as trigger for a re-initialisation
• Numerous adaptors enable the unit to be fitted onto non-SAUTER valves
• Power supply 230 V with module or direct connection for 24 V~ or 24 V=; continuous activation also admissible with 230 V
• Maintenance-free gear unit made of sintered steel; gearbox base-plate made of steel
• Spring pack and mounting column made of stainless steel; mounting bracket made of cast light alloy for valve fitting
• Electrical connections (max. 2.5 mm²) with screw terminals
• Three pre-scored cable inlets for M20 × 1.5 (2×) and M16 × 1.5
• Fitting vertically upright to horizontal, not suspended

AVF234SF132

Product parameter

Basic information
Brand: SAUTER
Model: AVF234SF132
Technical parameter
Fluid type: Suitable for handling air flow.
Working pressure: 0.5-10 bar, suitable for application under different pressure conditions.
Caliber: G1/8, specifies the size specification of the valve.
Flow coefficient: Cv=0.3, indicating the flow capacity of the valve under specific conditions.
Voltage: 24VDC, the voltage required to power the valve.
Power: 10W, indicating the power consumption of the valve in normal working condition.
Operating temperature: -10°C to +50°C, indicating the temperature range in which the valve can work normally.
Response time: <20ms, indicating that the valve from receiving the electrical signal to the completion of the action required time is very short.
Seal class: IP65, to ensure the valve in dust and water resistance of good performance.

Application field

The AVF234SF132 solenoid valve can be used in a wide range of applications where gas flow needs to be controlled, including but not limited to:

Industrial control: Gas control for automatic production lines, mechanical equipment, etc.
Pneumatic machinery: provides stable gas on-off control for pneumatic equipment.
Medical equipment: In medical equipment, precise control of gases is achieved.
Packaging machinery: Provide stable gas control for packaging equipment to ensure packaging quality.

Other related product recommendations：

3500/15 Plastic panel BENTLY NEVADA Ac and DC power supplies

X20CP1586 B&R The core product of B&R’s I/O system line

IC698PSA350 GE High capacity power module

VMIVME 3215-000 GE Computer module

201TI GE Microprocessor-based electrical transmitter

3500/05-01-02-00-00-01 BENTLY System rack

PM865K02 ABB controller

3500/22-01-01-00 138607-01 BENTLY Transient data interface before and after the size card module

IS420UCSBH4A GE Controller module manufactured by General Electric

D201376 METSO Analog input module

IS420UCSBH4A GE Controller module manufactured

IS220PRTDH1A 336A4940CSP6 GE Controller module

IS220PSCAH1A 336A4940CSP9 GE A serial communication terminal board interface

IS220PDIAH1BE 336A5026ADP4 GE Gas turbine module

3500/42M 176449-02 Proximitor Seismic Monitor

3500/40M 176449-01 Display and condition monitoring software module

85UVF1A-1QD Integrated Flame Scanner with Internal Flame Relay

2711P-RP2 Allen Bradley DC-powered logic module

MVI56-ADM Prosoft Programmable Application Development Module

BMXCPS2010 Schneider Standard power module

BMXDDO6402K Schneider discrete DC output module

BMXDDI3202K Schneider discrete input module

PCI-6221 779066-01 Multifunction I/O Device

SHC68-68-EPM NI Multifunctional cable

05701-A-0361 Backplane Serial communication controllers and monitors

AI03 ABB AI module 2-3-4 Wire RTDs

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com