Description
NFAI143-S50 analog input module
Product Description
The NFAI143-S50 is an analog input module in Yokogawa Electric Corporation’s STARDOM controller system, designed to measure current signals from a variety of industrial sensors and transmitters, typically in the signal range of 4-20mA or 0-20mA. Here are some of the key specifications and features of the module:
Number of channels: 4 channels
Input type: Current (4-20mA or 0-20mA)
Accuracy: ±0.1% reading
Resolution: 16 bits
Input range: 0mA to 24mA
Cold end compensation: automatic
Linearization: Built-in for various sensor types
Diagnostic function: Provides diagnostic information about modules and sensors
Operating temperature range: -20 to +70°C
Power supply: 24V DC
Installation method: Can be installed on DIN rail
Communication method: Connect to STARDOM system via network
In addition, the NFAI143-S50 module has the following features:
High accuracy: Provides the precise measurements needed for reliable control.
Wide input range: suitable for most standard current sensors.
Automatic cold end compensation: ensures accurate temperature measurement when using thermocouples.
Built-in linearization: simplifies setup and improves measurement accuracy.
Diagnostic function: Helps identify and troubleshoot problems with modules or connected sensors.
Compact design: Saves space in the control cabinet.
Easy configuration: user-friendly interface for setting input range, filtering, and scaling.
Product parameter
Model: NFAI143-S50
Brand: Yokogawa
Input signal type: 4-20 mA or 0-20 mA current signal
Number of channels: 16 channels
Isolation feature: Electrical isolation between input and system
Withstand voltage: Up to 1500 V AC between the input and the system
Power requirements: 24.0 to 25.5 volts (V), output current limited to 25 milliamps (mA)
Accuracy: ±0.1% full scale
Data refresh cycle: 10 milliseconds (ms)
Input resistance: 250 Ω when turning on, 500 kΩ or higher when turning off
Overcurrent protection: Provided
Temperature drift: maximum ±0.01%/°C
Maximum current consumption: 230 mA (5 V DC) or 540 mA (24 V DC)
Weight: 0.3 kg
External connections: pressure clamp terminals, MIL connector cables
HART communication: available
Mounting method: DIN rail mounting may be supported
Application field
Industrial process control: Monitor and control various process parameters such as flow, pressure, level, etc. measured by current output sensors.
Data acquisition: Current data is collected from different sensors for analysis and monitoring.
Machine monitoring: Monitoring machine parameters such as vibration, speed and power consumption through current sensors.
Environmental monitoring: Use current output sensors to measure environmental parameters such as temperature, humidity, and gas concentrations.
Other related product recommendations:
MVI56-ADM Prosoft Programmable Application Development Module |
BMXCPS2010 Schneider Standard power module |
BMXDDO6402K Schneider discrete DC output module |
BMXDDI3202K Schneider discrete input module |
PCI-6221 779066-01 Multifunction I/O Device |
SHC68-68-EPM NI Multifunctional cable |
05701-A-0361 Backplane Serial communication controllers and monitors |
AI03 ABB AI module 2-3-4 Wire RTDs |
AI02J ABB AI module 2-3-4 Wire RTDs |
IOC-555-D 17-550555-001 GE Electronic components |
PC834-001-T PACIFIC SCIENTIFIC Brushless Servo Drive |
8440-1666 B SPM-D11/LSXR features 12/24 VDC power supply |
IC670ALG310 GE voltage-source analog output module |
PM866K01 3BSE050198R1 AC800M processor unit |
81001-340-71-R Allen Bradley Inverter processing module |
PXI-8423 NI PXI-8423/2 RS-485 Interface |
AD02 ABB AI module 2-3-4 Wire RTDs |
MVME55006E-0163 MOTOROLA VMEbus Single-Board Computer |
531X301DCCAFG2 GE DRIVE CONTROL BOARD |
A6370D Emerson A6370 Overspeed Protection Monitor |
1715-TASOB8DE Allen Bradley termination assembly |
4PP065.0571-X74F Power Panel PP65 |
2094-BC02-M02 Kinetix 6000 Integrated Axis Module (IAM) |
MVI56E-MCM ControlLogix series communication module |
1769-L32E CompactLogix Modular controller |
DI810 16 Digital Input module |
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com