Description
PXIe-5160 high-performance PXI Express
Product Description
The PXIe-5160 is a high-performance PXI Express oscilloscope manufactured by National Instruments. Details are as follows:
Product model: PXIe-5160
Number of channels: There are two models, two channels (PXIe-5160 (2 CH)) and four channels (PXIe-5160 (4 CH)), all channels can be sampled simultaneously 120121.
Input type: See single-end input. Use BNC connector 121.
Analog bandwidth: 500 MHz
Sampling rate: Up to 2.5 GS/s 122.
Vertical resolution: 10-bit 122.
Coupling mode: AC (AC) or DC (DC) 121.
Input impedance: Software can choose between 50 Ω or 1 MΩ, typical values are 50 Ω ± 1.50% and 1 MΩ ± 0.75%, respectively.
Input capacitance: Typical value 15 pF ± 0.8 pF 121.
Voltage level: The specific voltage level depends on the selected input range 121.
Spectral characteristics: For example, for input frequencies less than 10 MHz, the typical value of spury-free dynamic range (SFDR) is 56 dBc 121.
Storage depth: The onboard memory size is 64 MB or 2 GB, allowing a minimum record length of 1 sample 121.
Calibration: Support for external calibration and self-calibration, which can be done on software commands to correct gain, offset, trigger and timing errors 121.
Trigger type: Edge trigger, digital trigger, immediate trigger, and delayed trigger 121.
Synchronization: PXI synchronization and data streaming capabilities are supported, and some models also support CableSense™ technology for detecting and locating signal path problems.
Software support: NI-SCOPE IVI compatible drivers, Support for development environments such as LabVIEW, LabWindows™/CVI™, Measurement Studio, Microsoft Visual C/C++, and.NET (C# and VB.NET) 121.
Physical characteristics: 3U height, 1 slot width PXI Express first-generation x4 module with dimensions of 21.4cm × 2.0cm × 13.1cm (8.4 in. × 0.8 in. × 5.1 in.), It weighs approximately 430 g (15 oz.) 121.
Environmental characteristics: Operating temperature range 0 °C to 45 °C, storage temperature range -40 °C to 71 °C, non-condensing humidity of 10% to 90% 121.
The PXIe-5160 oscilloscope is ideal for applications where high-speed signals are required, and its high-precision trigger circuit and synchronization capabilities make it ideal for laboratory and production test environments.
Product parameter
Product model: PXIe-5160
Number of channels: There are two models, two channels (PXIe-5160 (2 CH)) and four channels (PXIe-5160 (4 CH)), all channels can be sampled simultaneously 120121.
Input type: See single-end input. Use BNC connector 121.
Analog bandwidth: 500 MHz
Sampling rate: Up to 2.5 GS/s 122.
Vertical resolution: 10-bit 122.
Coupling mode: AC (AC) or DC (DC) 121.
Input impedance: Software can choose between 50 Ω or 1 MΩ, typical values are 50 Ω ± 1.50% and 1 MΩ ± 0.75%, respectively.
Input capacitance: Typical value 15 pF ± 0.8 pF 121.
Application field
R&d testing: During the new product development phase, it is used to test and verify that the performance of electronic equipment meets the design specifications.
Manufacturing and Quality Control: Monitoring product performance on the production line to ensure that the product meets quality standards during manufacturing.
Aerospace: Monitoring and analysis of electronic system signals in aircraft, satellites or spacecraft.
Automotive electronics: Testing and validating electronic control units, sensors and communication systems in automobiles.
Semiconductor testing: Testing and characterization of high-speed signals during chip design and manufacturing.
The communications industry: Analyzes and tests signal integrity in communications equipment, including wireless signals and high-speed data transmission.
Medical equipment: Ensure that electronic components and life support systems in medical equipment are working properly.
Industrial automation: Monitoring signals in industrial control systems to improve production efficiency and safety.
Research education: in universities and research institutions, as a tool for studying high-speed electronic phenomena and teaching.
Defense and Military: Used in the military and defense field to test and monitor electronic systems with high reliability requirements.
Consumer electronics: Test signals in consumer electronics such as smartphones, computers and home appliances.
Power system: Monitor the signals in the power system to ensure the stability of the grid and the performance of the equipment.
Other related product recommendations:
MVI56-ADM Prosoft Programmable Application Development Module |
BMXCPS2010 Schneider Standard power module |
BMXDDO6402K Schneider discrete DC output module |
BMXDDI3202K Schneider discrete input module |
PCI-6221 779066-01 Multifunction I/O Device |
SHC68-68-EPM NI Multifunctional cable |
05701-A-0361 Backplane Serial communication controllers and monitors |
AI03 ABB AI module 2-3-4 Wire RTDs |
AI02J ABB AI module 2-3-4 Wire RTDs |
IOC-555-D 17-550555-001 GE Electronic components |
PC834-001-T PACIFIC SCIENTIFIC Brushless Servo Drive |
8440-1666 B SPM-D11/LSXR features 12/24 VDC power supply |
IC670ALG310 GE voltage-source analog output module |
PM866K01 3BSE050198R1 AC800M processor unit |
81001-340-71-R Allen Bradley Inverter processing module |
PXI-8423 NI PXI-8423/2 RS-485 Interface |
AD02 ABB AI module 2-3-4 Wire RTDs |
MVME55006E-0163 MOTOROLA VMEbus Single-Board Computer |
531X301DCCAFG2 GE DRIVE CONTROL BOARD |
A6370D Emerson A6370 Overspeed Protection Monitor |
1715-TASOB8DE Allen Bradley termination assembly |
4PP065.0571-X74F Power Panel PP65 |
2094-BC02-M02 Kinetix 6000 Integrated Axis Module (IAM) |
MVI56E-MCM ControlLogix series communication module |
1769-L32E CompactLogix Modular controller |
DI810 16 Digital Input module |
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com