Description
NOTIFIER ACPS-2406 auxiliary power and battery charger
Product Description
NOTIFIER ACPS-2406 is an auxiliary power and battery charger with several unique features. The following are the details of its product description:
Product overview
Name: ACPS-2406 Addressable Charger/Power Supply with built-in synchronization
Features: Auxiliary power and battery charger with built-in sync function.
Main feature
Address programmable: Each notification device circuit (NAC) can be individually addressed via the Fire Alarm Control Panel (FACP) without the need for a control module.
Synchronization: Each NAC can be synchronized with a System Sensor, Wheelock, or Gentex audio/video device.
Output power: Each NAC provides 6.0 amps of output power, or 5.0 amps of general purpose power supply.
Multiple configuration options:
Each circuit can be selected with a DIP switch as a universal 24VDC power supply, a four-wire detector power supply, or a notification device circuit.
Supports steady-state, step-time (120 PPM), two-phase, time or UZC regional coding and non-coding devices.
Universal Area encoder (UUZC-256) : Supports programmable encoding output and can encode up to 256 different codes.
Battery charging: It can charge the battery from 7 to 25 amps and has full monitoring function.
AC failure detection: Provides AC failure detection and delay reporting functions.
Power limit output: with power limit output function.
Signal line interface: With isolated signal line (SLC) interface.
Ground fault detection: Select ground fault detection.
Two-stage operation: Supports Canadian two-stage operation
Product parameter
Installation standards and specifications
Meet the standard:
NFPA 72 National Fire Alarm Code.
UL 864 Standard for fire alarm system control units.
CAN/ULC – S527-M87.
Application scenario
Fire Alarm System: ACPS-2406 is compatible with NOTIFIER Intelligent Fire Alarm Control Panel (FACPs) and is widely used in fire alarm systems.
Sync application: Sync for Gentex, SpectrAlert series and Wheelock flash and horn.
Power limited output: The output is power limited, unmonitored, and can be monitored using an end-to-end relay.
Installation and configuration
Installation position: The ACPS-2406 can be installed in the lower left or right corner of the CAB-3 series cabinet, in the CHS-6 chassis, occupying two Spaces on the left side, or in the CHS-PS chassis, on the right side.
DIP switch configuration: By configuring two sets of DIP switches (SW2 and SW3), you can set the mode and options of the output circuit.
Battery calculation
Battery size Limit: Use the internal ACPS-2406 battery charger with a battery size limit of 7.0 amps to 25.0 amps.
External battery charger: For batteries greater than 25.0 amps, you can disable the internal charger and use an external battery charger
Meet the standard:
NFPA 72 National Fire Alarm Code.
UL 864 Standard for fire alarm system control units.
CAN/ULC – S527-M87.
Application scenario
Fire Alarm System: ACPS-2406 is compatible with NOTIFIER Intelligent Fire Alarm Control Panel (FACPs) and is widely used in fire alarm systems.
Sync application: Sync for Gentex, SpectrAlert series and Wheelock flash and horn.
Power limited output: The output is power limited, unmonitored, and can be monitored using an end-to-end relay.
Installation and configuration
Installation position: The ACPS-2406 can be installed in the lower left or right corner of the CAB-3 series cabinet, in the CHS-6 chassis, occupying two Spaces on the left side, or in the CHS-PS chassis, on the right side.
DIP switch configuration: By configuring two sets of DIP switches (SW2 and SW3), you can set the mode and options of the output circuit.
Battery calculation
Battery size Limit: Use the internal ACPS-2406 battery charger with a battery size limit of 7.0 amps to 25.0 amps.
External battery charger: For batteries greater than 25.0 amps, you can disable the internal charger and use an external battery charger
Application field
The MVME2400-0361 is an industrial-grade single-board computer designed for high performance computing and high reliability, which has a wide range of applications in the aerospace field. Here are some specific application examples:
Satellite control: The MVME2400-0361 can be used in the flight control and navigation system of satellites, providing the necessary data processing and control command generation.
Navigation system: In the field of navigation, this single-board computer can process data from various sensors to provide accurate positioning and navigation information.
Flight control Systems: In flight control applications, the MVME2400-0361 processes flight data in real time to ensure flight safety and efficiency.
Complex control systems: For example, it can be used in the control systems of large telescopes to process multiple input signals and generate control signals to achieve precise control.
Defense and military applications: The MVME2400-0361 can also be used for critical missions such as missile guidance systems, radar systems, and control of unmanned aerial vehicles.
The MVME2400-0361’s high-performance processor, rich I/O interfaces and high reliability make it an ideal control and computing platform for the aerospace industry. In addition, its flexibility and scalability allow it to be customized according to specific task requirements to meet the needs of a variety of high-performance applications.
Other related product recommendations:
MVI56-ADM Prosoft Programmable Application Development Module |
BMXCPS2010 Schneider Standard power module |
BMXDDO6402K Schneider discrete DC output module |
BMXDDI3202K Schneider discrete input module |
PCI-6221 779066-01 Multifunction I/O Device |
SHC68-68-EPM NI Multifunctional cable |
05701-A-0361 Backplane Serial communication controllers and monitors |
AI03 ABB AI module 2-3-4 Wire RTDs |
AI02J ABB AI module 2-3-4 Wire RTDs |
IOC-555-D 17-550555-001 GE Electronic components |
PC834-001-T PACIFIC SCIENTIFIC Brushless Servo Drive |
8440-1666 B SPM-D11/LSXR features 12/24 VDC power supply |
IC670ALG310 GE voltage-source analog output module |
PM866K01 3BSE050198R1 AC800M processor unit |
81001-340-71-R Allen Bradley Inverter processing module |
PXI-8423 NI PXI-8423/2 RS-485 Interface |
AD02 ABB AI module 2-3-4 Wire RTDs |
MVME55006E-0163 MOTOROLA VMEbus Single-Board Computer |
531X301DCCAFG2 GE DRIVE CONTROL BOARD |
A6370D Emerson A6370 Overspeed Protection Monitor |
1715-TASOB8DE Allen Bradley termination assembly |
4PP065.0571-X74F Power Panel PP65 |
2094-BC02-M02 Kinetix 6000 Integrated Axis Module (IAM) |
MVI56E-MCM ControlLogix series communication module |
1769-L32E CompactLogix Modular controller |
DI810 16 Digital Input module |
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com