1420-V1P-ENT power monitoring device

Accuracy: 1.00%
Alarm: Yes
Communication: None (but optional)
Frequency rating: 45-65Hz
Interface: Built-in LCD
Output: 2 pulses
Voltage (via direct connection or VT/PT) : 120/208V LL
Input impedance: 5(6)A, <0.2VA
Current overload: 6 A, continuous at 50/60 Hz
Control Power Supply: Range: 100 to 240V AC (48 to 62Hz)
Voltage overload: 2 x Vnom (Vnom is the rated voltage of the module) for 500 ms
Coupling type: with CT
Temperature drift: ≤ 200 ppm/°C
Current range (via CT) : 5 A nominal (6 A Max)
Rated input: System type: 1, 2, or 3 phases
Current type: Electrical isolation from built-in CT
Methods: Real RMS was used to measure the distorted waveform
Sampling rate: 3840 sAles/s at 60 Hz, 3200 sAles/s at 50 Hz
Energy additional error: according to EN62053-21 ANSI C12.1, impact Class B according to EN50470-3, EN62053-23
Current sensing: Nominal: 5 A
Voltage sensing: Nominal: 120V AC LN, 208V AC LL Range: 40 to 144V AC LN RMS, 70 to 250V AC LL RMS
Pulse (digital) output: Yes
Front dimension: 96 mm
Height: Front dimension: 96 mm
Width: Front dimension: 96 mm
Accuracy: Voltage, nominal: 120V AC LN, 208V AC LL @ 25°C ±5°C, R.H. ≤ 60% @ 48… 62Hz
System and single-phase mean and maximum variables: Yes
Real-time clock function: Yes
Optional pair of digital (relay) outputs: Yes
Run hour counter: 8+2 digits
Energy measurement (import/export) : KWh and kVARh
Front protection class: IP65, NEMA 4X, NEMA 12
Measurement value display: four lines, each line 4 digits
Energy value display: tens digit and positive/negative sign
Universal power supply: 120/240V AC 50/60 Hz or 120/240V DC
Income grade energy measurement: According to ANSI C12.1 Class 1.0, ANSI C12.1
Configurable virtual alarms: up to four