中文版
Description
EX2100 GE Excitation Control System
[service contact information]
Tel: 18059884797 (WeChat with the same number)
QQ：3095989363
Email: sales@xiongbagk.cn
Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen
① 24-hour email reply (12 hours);
③ For shipment to countries outside Asia, please contact the seller.
Manufactured by GE Automation, the IC698CPE020 is a CPU from the PACSystems RX7i series. It is capable of real-time machine control and communicates with other rack modules via a standard VME backplane. Operation and control of the IC698CPE020 is accomplished by a connected computer or by an on-board three-position switch, which can be disabled if desired.
This device has a 700MHz Pentium III floating point microprocessor. Standard execution speeds for this processor are 0.14ms for every 1000 Boolean contacts. Ten megabytes of volatile memory (RAM) and 10 megabytes of flash memory (NVRAM) are available for use. A CMOS battery is required to support volatile memory. Flash memory is non-volatile. RAM and NVRAM can be used for user data, programming configuration, storing symbolic variables, and any information associated with the register. The operating system firmware is also stored in NVRAM. To update firmware, simply connect the IC698CPE020 to a computer using the proper serial port and run the update software.
Follow the procedures outlined in the manual while installing. Record the device’s MAC address. Power off the rack. In rack slot one, insert the IC698CPE020. Connect the device to the Ethernet LAN. Restore rack power. Connect the CMOS battery.
The IC698CPE020 has three serial ports and two Ethernet ports. For Ethernet connections, a category 5 shielded or unshielded RJ-45 twisted pair cable is needed, as well as TCP/IP configuration. Supported serial ports include RS-232 and RS-485. The third serial port is a station manager port.
Select features of this device include support for 512 program blocks, ladder diagram and C programming, symbolic variable support, modification testing modes, and the ability to monitor system data over a network. Note: Up to 16 web and FTP server connections are possible when using web monitoring.
IC698CPE020-CC
IC698CPE020-CC
IC698CPE020-CC
IC698CPE020-CC
Main business:
lInvensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.
lInvensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.
lWestinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.
lRockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.
lSchneider Modicon: Quantum 140 series processors, control cards, power modules, etc.
lABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.
lSiemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.
lMotorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.
lXYCOM:I/O, VME board and processor.
lGE FANUC (GE FANUC): modules, cards, drives and other spare parts.
lYaskawa (ochuan): servo controller, servo motor, servo driver.
lBosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.
lWoodward (Woodward): SPC valve position controller, PEAK150 digital controller.
lSpare parts for industrial robot system
lAdvantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.
If you need, we can solve your defect part or exchange. Welcome to inquire! We will give you the best service!
[Friendly reminder]
payment:
bank transfer or Escrow or Paypal or Western Union.
we accept USD and RMB payment both.
Leadtime:
some stock parts can ship out within 3-5days. Some is 3-4weeks for booking.
I. Mode of transportation and mode of freight:
① According to the shipping companies in different regions. (If you need to specify a transportation company, please contact the seller)
② Freight and transportation price (excluding national customs fees and other expenses) shall be subject to the actual freight price provided by the seller.
③ In China (including Hongkong, Macau and Taiwan Province), most of the shipping is free. Please contact the staff.
II. Payment method:
Please choose the payment method according to the actual situation. If you have any questions, please contact the seller! ！ ！ ！ ！
III. Product quality and after-sales service:
1. Consult the seller’s product quality and buy again. If you have any questions, please contact the seller.
2. During after-sales service, as the case may be. If you want to delay the after-sales service, otherwise the seller’s after-sales policy shall prevail. Please contact the seller.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
Reviews
There are no reviews yet.