Description

IC698ACC701 GE Auxiliary Smart Battery Module

[service contact information]

Tel: 18059884797 (WeChat with the same number)
QQ：3095989363
Email: sales@xiongbagk.cn
Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen

① 24-hour email reply (12 hours);

③ For shipment to countries outside Asia, please contact the seller.

Brand	GE Fanuc
Series	Rx7i PACsystem
Part Number	IC698ACC701
Description	Auxiliary Smart Battery Module
Application	RX7i System
Max Current Rating	15.0 Amps
Operating Temperature Range	0 to 60 Degrees Celsius

The IC698ACC701 Auxiliary Smart Battery Module comes with a flame-retardant ABS plastic casing that helps protect against harsh environmental condition. It is supplied as a factory assembled package consisting of a module with a 0.6-meter twisted red/black cable that has a 4-pin female JAE connector, and a 50-millimeter enabling adapter cable with a 4-pin male to 2-pin female connector on one end that is compatible with the battery connectors on PACsystems CPUs. The IC698ACC701 Module has a maximum battery life of 200 days when it is used as a memory battery backup for the IC695CPU310 or the IC695CMU310 RX3i PACsystems CPUs and of 23 days maximum for the RX3i PACSystems CPUs like the IC695CPU320/CRU320 or the IC695CPU315 CPUs. The IC698ACC701 Module has 0 to 60 degree Celsius operating temperature range and approximate dimensions of 5.713 x 2.5 x 1.5 inches (H x W x D).

IC698ACC701

The IC698ACC701 is a Smart Coin Battery manufactured by GE Automation as part of the PACSystems RX7i family. The “smart” feature of this lithium battery enables it to warn the operator when power reaches low levels. Nominal power output for this battery is greater than 2.5 volts. When the battery reaches low levels, power output will drop to less than 2.5 volts. From that point, the operator has 15 days to replace the battery before volatile memory contents are lost.

Before installing, confirm that the JAE connectors and enabling adapter cable are present. Also confirm that the battery’s date code is accurate. To begin, the female JAE connector on the battery should be connected to the male JAE connector on the enabling cable. The female connector on the enabling cable can then be connected to the battery access ports on the central processing unit. Note: There are differences in battery access ports between RX3i and RX7i devices. Refer to product documentation for specific instructions.

To increase efficiency and prolong the lifetime of the IC698ACC701, power on the central processing unit before connecting the battery. Once connected, the battery will drain even if rack power is off. Furthermore, when the battery is not being used, disconnect the enabling cable to increase the battery’s lifespan even more. When disposing of a drained battery, follow the guidelines for proper disposal, which are included with this product.

Main business:

①ABB AC800M series modules, industrial robot spare parts dsqcseries, Bailey infi90,800xa, advantocs with master software, with mod300 software advantocs, freelance-distributed control system of process industry,

Symphony Melody, Sattocs, Symphony DCI System Six, Harmony/Infi90, Security System

② CPU module of ②Schneider 140 series products

③General electric series products IC693 IC695 IC697 IC698

Relay protection SR469 start SR369 start SR489 start SR750 start

Is200/is215/is220/is420/ds200/ds215/VMI VME beginning 7750 7807

④Ticonex series products 3721,3503,4351B,3625,3009.

⑤Bently (Bentley) 3500 series big card small card 1900 series power supply module

3500/15 3500/20 3500/22M 3500/42M 3500/25 3500/32 3500/53

⑥Allen-Bradley (AB, USA) series products 1394, beginning 2711, beginning 1756,1747, etc

⑦ EMERSON /Westinghouse series products OVATION system, WDPF system and MAX0 system spare parts.

DELTAV DELTAV VE3008/CE3008/SE3008/VE3007/VE3006SE4006P2

⑧Foxboro: I/A Series system, FBM (field input/output module) FCP270/FCP280/FBM201…FBM242 for sequence control, ladder logic control, accident recall processing, digital-analog conversion, input/output signal

processing, data communication and processing, etc.

⑨Siemens: Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.

Attending bosch rexroth (bosch rexroth): Indramat, I/O module, PLC controller, drive module, etc.

Motorola: MVME 162, MVME 167, MVME5500, MVME6100 and other series.

[Friendly reminder]

payment:

bank transfer or Escrow or Paypal or Western Union.

we accept USD and RMB payment both.

Leadtime:

some stock parts can ship out within 3-5days. Some is 3-4weeks for booking.

I. Mode of transportation and mode of freight:

① According to the shipping companies in different regions. (If you need to specify a transportation company, please contact the seller)

② Freight and transportation price (excluding national customs fees and other expenses) shall be subject to the actual freight price provided by the seller.

③ In China (including Hongkong, Macau and Taiwan Province), most of the shipping is free. Please contact the staff.

II. Payment method:

Please choose the payment method according to the actual situation. If you have any questions, please contact the seller! ！！！！

III. Product quality and after-sales service:

1. Consult the seller’s product quality and buy again. If you have any questions, please contact the seller.

2. During after-sales service, as the case may be. If you want to delay the after-sales service, otherwise the seller’s after-sales policy shall prevail. Please contact the seller.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “IC698ACC701 GE Auxiliary Smart Battery Module”