Description

IC660BBA020 GE Combination I/O module

[service contact information]

Tel: 18059884797 (WeChat with the same number)
QQ：3095989363
Email: sales@xiongbagk.cn
Address: Unit 2009, Chuangxiang Center, No.1733, Lvling Road, Siming District, Xiamen

① 24-hour email reply (12 hours);

③ For shipment to countries outside Asia, please contact the seller.

Brand	GE Fanuc
Series	Genius I-O
Manufacturer	Emerson Automation / GE Fanuc (formerly)
Part Number	IC660BBA020
Series	Genius I/O
Product Description	Combination I/O module
Part Number	IC660BBA020
No. of Inputs	Four (4) analog inputs
Input Signals	0–10 VDC, 10 VDC, 5 VDC, 0–5 VDC, 4–20 mA (or 1–5 VDC)
No. of Outputs	2
No. of Outputs	Two (2) analog outputs
I/O Resolution	12 bits + sign
Output Signals	0–10 VDC, 10 VDC, 5 VDC, 0–5 VDC, 4–20 mA (or 1–5 VDC)
I/O Update Frequency	Once every 4 ms
Supply voltage range	18-56 VDC

IC660BBA020

The IC660BBA020 is a voltage/current analog block in the GE Fanuc Genius I/O series. It has four input and two output circuits. Two types of analog blocks are available with a power supply of 115 VAC and 24/48 VDC. IC660BBA020 supports five analog ranges: 0-10 volts DC; -10 volts DC to +10 volts DC; -5 volts DC to +5 volts DC; 0-5 volts DC; and 4-20 mA/1-5 volts DC. The internal power supply of this block can drive a current load of 300 Ohms. Configurable block features include independent scaling; fault reports which can be enabled or disabled depending on input/output; selectable input filter time up to 1024ms; powerup default values for each output; and Low/High Alarm detection, among others.

IC660BBA020 is compatible with any handheld monitor IC66*HHM500, though HHM501 requires a change in configuration. The serial bus uses terminals 1 to 4 with AWG wires. Field devices use terminal 5 to 32 with AWG wires. Terminals 6 (DC+) and 7 (DC-) connect the power source to the 24/48 VDC. H and N terminals connect the 115 VAC block with the 250V, 1/8Amp slow blow fuse. Terminals 5, 12, 28, and 20 are for ground. Three terminals named common are for a source. The user can connect input voltage device between V+ and IN and V- and RTN terminal in series. The user can connect output voltage device to terminals COM and VOUT. JMP terminal is for jumper connection. Terminals I+ and I- are for the current mode. The first four input circuits convert incoming current or voltage signal to digital count with optional scaling. Circuit numbers 5 and 6 give output scaled digital count from CPU. I/O Enabled and Unit OK LEDs indicate the operating status of the block. The diagnostics system indicates fault messages.

Main business:

lInvensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.
lInvensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.
lWestinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.
lRockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.
lSchneider Modicon: Quantum 140 series processors, control cards, power modules, etc.
lABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.
lSiemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.
lMotorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.
lXYCOM:I/O, VME board and processor.
lGE FANUC (GE FANUC): modules, cards, drives and other spare parts.
lYaskawa (ochuan): servo controller, servo motor, servo driver.
lBosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.
lWoodward (Woodward): SPC valve position controller, PEAK150 digital controller.
lSpare parts for industrial robot system
lAdvantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.
If you need, we can solve your defect part or exchange. Welcome to inquire! We will give you the best service!

[Friendly reminder]

payment:

bank transfer or Escrow or Paypal or Western Union.

we accept USD and RMB payment both.

Leadtime:

some stock parts can ship out within 3-5days. Some is 3-4weeks for booking.

I. Mode of transportation and mode of freight:

① According to the shipping companies in different regions. (If you need to specify a transportation company, please contact the seller)

② Freight and transportation price (excluding national customs fees and other expenses) shall be subject to the actual freight price provided by the seller.

③ In China (including Hongkong, Macau and Taiwan Province), most of the shipping is free. Please contact the staff.

II. Payment method:

Please choose the payment method according to the actual situation. If you have any questions, please contact the seller! ！！！！

III. Product quality and after-sales service:

1. Consult the seller’s product quality and buy again. If you have any questions, please contact the seller.

2. During after-sales service, as the case may be. If you want to delay the after-sales service, otherwise the seller’s after-sales policy shall prevail. Please contact the seller.Foxboro Foxboro DCS card module P0400QB QWERTY keyboard assembly.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “IC660BBA020 GE Combination I/O module”