Brand: Bently Nevada

P/ n:3500/90

Description: Communication gateway

Origin: United States

Xiamen Xiongba provides 3500/40M DCS/PLC, Xiamen Xiongba Shan Ni for your quotation, and provide one-year warranty service.

3500/90 high quality affordable models.

Xiamen Xiongba Electronic Commerce Co., LTD. (Zhangzhou Branch)
Unit 2009, Creative Center, 1733 Luling Road, Siming District, Xiamen, China
M: + 86 18059884797
Email :sales@xiongbagk.cn
Website:www.sauldcs.com/www.xiongbagk.cn

Monitoring channels are set up in pairs and can perform up to two specified functions simultaneously. For example, channels 1 and 2 May perform one function, while channels 3 and 4 perform another or the same function.

The Proximitor seismic monitor protects the machine by triggering an alarm by comparing the monitoring parameters in real time with a selected alarm set point. It notifies operations and maintenance employees about critical machine information.

Depending on the arrangement, each channel typically modulates its input signal to produce a static set of values. You can set up an alert set point for any current static value and a danger set point for any two of them.

Use rack configuration software to set the alert level for any value measured by the monitor and set the hazard set point for any two values measured by the monitor. For each measurement, you can set an alert in the range of 0 to 100% of the full scale. When the full scale range exceeds the sensor range, the set point is limited by the sensor range.

When the Monitor module works normally, the OK LED is on.

TX/RX leds light up when the Seismic Monitor module is connected to other modules in the 3500 rack.

If the seismic monitor is in bypass mode, the bypass LED lights up.

Buffer sensors: Each channel has its own coaxial connector in front of the display. Each connector has built-in short circuit protection.

550 ohm output impedance

Shaft power supply -24 Vdc

Resolution of 0.3662 A/bit

Sensor power supply -24 Vdc

Absolute output impedance 300 ohms