IS200VCMIH2CAA

IS215VCMIH2CA

IS200VCMIH2CAA is an AG Mark VI board component. The board is designed for the Speedtronic system and functions as a communication card. It is usually installed in the first slot of the VME rack. IS200VCMIH2CAA has an additional front panel. The panel is attached to the circuit board using screw fasteners along the front edge of the circuit board. Two screw retainers are located at the top and bottom edges of the panel. These help to lock the board firmly into the rack after installation and also help to remove the board from the backboard when replacing it. One is marked with the GE logo and the other with the motherboard ID number. The panel of the board consists of three IONet connectors, a serial port (positive) with screws attached to secure the associated cable, and a reset button. In addition, there are four sets of LED indicators on the panel. Each or each set of indicators is correctly labeled. IS200VCMIH2CAA has components on both the front and back. The back side is mainly composed of capacitors and resistors. The front surface of the board also includes capacitors and resistors, as well as more than 40 integrated circuits (including FPGAs), several connectors, including two backplanes, test points, inductors/chokes, and transistors