DS200TCCBG1ALD Configuration:
Hardware: The Mark V LM’s generator and bus voltage monitoring capabilities, as well as line current monitoring capabilities, are provided by hardware jumpers J1, J2, J3, J4 and J5. The RS232 serial port is connected to the DCOM through the hardware jumper J14. J15 and J16 are the hardware jumpers used for testing. For details on hardware jumper Settings for this board, see Appendix A and the Hardware Jumper Panel of the Operator interface.
Software: In HMI’s I/O configuration editor, you can enter bus voltage and line current Settings, as well as I/O configuration constants for generators, milliamp inputs, RTDS, and other devices.

DS200TCCBG1ALD