GE I/O TC2000 analog board DS200TCCBG1ANE has an 80196 microprocessor and several PROM modules. The DS200TCCBG1ANE also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. Leds can be used to indicate whether the board is being powered up and whether information is being processed. However, you can take troubleshooting measures to verify that the board works as designed. When the driver is offline and the voltage is cut, press all cables into the connector to ensure they are fully in place. A cursory visual inspection can easily indicate that the connection between the cable and the circuit board is complete. However, you may find that not all connections are made, and gently pressing the cable along the length of the connector will ensure that all signals are transmitted between the cable and the board connector.

DS200TCCBG1ANE

DS200TCCBG1ANE Another source of information is the Drive Diagnostic tool, which provides detailed reports on all processing of the board. It also lists any warnings or error messages from the drive. It also lists any trip conditions that will automatically shut down the drive. For example, if the sensor indicates that the drive is overheating, it will issue an overheating condition and shut down the drive automatically. The reports also detail the activity of circuit boards, motors and other moving parts in the drive.