CK6000 Series Industrial Redundant Ethernet networking
* Supports Web, CLI, and SNMP management modes. The CLI supports Telnet and CONSOLE login
* Supports the store-and-forward mechanism
* Support common port feature Settings, such as port enable, adaptive or forced, flow control, etc
* Supports port mirroring for online debugging and monitoring network data status
* Support port bandwidth limiting function to optimize bandwidth utilization
* Supports port aggregation to expand network bandwidth and improve network transmission efficiency
* Supports port priority QoS Settings to improve network service quality
* Supports port MAC address learning and statistics
* 802.1Q VLAN Settings are supported to effectively control the broadcast domain
* Supports unicast and multicast MAC address management
* Supports static IGMP multicast filtering, used to filter multicast traffic in industrial Ethernet protocols
* Supports SNMP V1, V2C, and V3 to ensure the stability of network management at different levels
* Supports RSTP to prevent packet proliferation and infinite loop in loop networks
* Support plug and play redundant self-healing Ethernet ring network technology (fault recovery time < 20ms under full load), support ring network single-ring, tangent and intersecting three ring network modes
* Support relay alarm output
* Supports global network system management
An eight-port industrial Ethernet switch supports four to eight 10/100BASE-T(X) RJ45 electrical ports and zero to four 100BASE-FX SC optical ports (FC and ST optional), flexibly combining optical and electrical devices based on service port requirements. Based on industrial installation requirements, 35mm guide rail or wall mounted installation modes are provided. The product also adopts fanless, low power consumption, industrial design, -40~85℃ operating temperature range, can meet the requirements of various industrial sites, provide convenient Ethernet communication solutions.
interface
* RJ45 electrical port: 10/100BASE-T(X) rate adaptive, full/half duplex mode, supports automatic port reversal
* 100 Mbit/s optical port: 100 Base-FX 100 Mbit/s full-duplex, SC port by default, FC port, ST port optional, up to 120 km transmission
* Console: RS-232 (RJ45 connector)
* Alarm output: 1 relay output, current load capacity DC24V/1 A
* Power input: two power inputs, using 4-core pluggable 7.62mm spacing standard industrial terminals
Exchange attribute
* 10MB forwarding speed: 14881pps
* 100 Mbit/s forwarding speed: 148,810 PPS
* Gigabit forwarding speed: 1,488,100 PPS
* Transmission mode: store and forward
* System switching bandwidth: 5.6Gbps
* Cache size: 1Mbits
* MAC address table: 8K
Power supply
* Supports redundant power input, typical working voltage: 12V/24V/48V
* Full load power consumption less than 12W
* Built-in overcurrent protection
relay
* Relay alarm output: port failure, power failure and ring network fault alarm output
* Contact capacity: 1 A 24VDC, industrial terminal interface
Mechanical characteristics
* Dimension (length * width * height) : 150.5mm*50mm*125.5mm
* Net weight: 900g
* Case: IP40 grade protection, metal case
* Installation: wall mounted or clamp rail mounted
Working environment
* Operating temperature: -40℃~85℃
* Storage temperature: -40℃~85℃
* Relative humidity: 5%~95% (no condensation)
Optional model
CK6080 Industrial network management switch, 8*10/100 BASet (X) RJ45 port, 35mm guide rail installation mode.
CK6071 Industrial network management switch, 7*10/100BaseT (X) RJ45 port, 1*100BaseFX X-ray port, single mode/multi-mode, 35mm rail installation mode.
CK6062 Industrial network management switch, 6*10/100BaseT (X) RJ45 port, 2*100BaseFX X-ray port, single mode/multi-mode, 35mm rail installation mode.
CK6044 Industrial network management switch, 4*10/100BaseT (X) RJ45 port, 4*100BaseFX X-ray port, single mode/multi-mode, 35mm rail installation mode.
RadiSys PBA 115970-010 PCB ASML 859-8150-002A
RADISYS SBC piSBC 386116 AA 451806-004 PSBCMM04FP PBA 456162-003
1 RADISYS EPC-200A DHL FedEx #A7 90
RadiSys CEQM67-2515-0 SBC + 4GB
1PCS Radisys CE945GM2A-L74-<wbr>M-2G #A1
RADISYS UIMC III-1 PBA.PFS-114-01<wbr>.UIMC3
1 RADISYS SH845GV 97-9045-01 6PCI 90 , DHL FedEx #A7
Radisys exm-10a
RADISYS UIMC III-1, 067-02389-0001 Controller Card as photo, sn:419A, DHLtoUS.
RadiSys 504802-008 pSBC 386258 U43L-4 Orbot WF 720
1 RADISYS SH845GV 97-9045-01 97-9567-11
QZ35Q QZ2G03-0-0
16918 RADISYS SERIPLEX DNET CTRL 61-0539-10 PFS-04-01 ADAP
RADISYS CORPORATION 63-0024-02 PCB 60-0149-03
RADISYS EXM-7 RS232
RadiSys 879-8103-001A PCB ASML
RadiSys 61-0575-10 PCB 60-0262-01 Eclipse Star 68-0070-11
RadiSys PBA 440005-005 PCB PSXM552A ASML 879-8103-001A
Radisys corporation EPC-5 CPU