Controller redundancy
Controller redundancy can be achieved by installing two AC 800F. To ensure quick and smooth takeover by the secondary AC 800F in case the primary AC 800F fails, a dedicated redundancy communications link through the second Ethernet module makes sure that both AC 800F are always synchronized. All inputs and outputs are designed to support redundant operation.
PROFIBUS line redundancy
Using the Redundancy Link Module RLM 01 will do the conversion of one simple, non-redundant PROFIBUS line into two reciprocally redundant lines. You can position the Redundancy Link Module RLM 01 directly after a PROFIBUS module (master), before a bus segment with several slaves or before an individual slave. PROFIBUS stations with redundant couplers can be directly connected to the PROFIBUS set redundant by RLM 01. Stations with only one interface can be optionally assigned to the one orother line. An alternative solution to the PROFIBUS line redundancy is to use a Fiber Optic Ring.
AC 800F – 16 MB,
115 / 230 VAC
With Ethernet 10BaseT, PROFIBUS module and Base Unit PM 803F
Incl. standard system test, battery SB 808F, mains cable TK 807F
(open end).
Slot assignment:
P = SA 811F, E1 = EI 813F, F3 = FI 830F, E2, F1, F2, F4 = Front panel.
Compliant to cULus by using mains cable TK 809F (3BDM000212R1).
Freelance V7.1SP2a or higher is mandatory.
3BDH000103R1
AC 800F – 16 MB,
prepared for
redundancy,
24 VDC
With Ethernet 10BaseT, PROFIBUS module and Base Unit PM 803F
Incl. standard system test, 2 batteries SB 808F, 2 mains cable TK 802F
(open end).
Slot assignment: P = SD 812F, E1, E2 = EI 813F, F3 = FI 830F, F1, F2, F4 =
Front panel.
Freelance V7.1SP2a or higher is mandatory.
3BDH000133R1
AC 800F, base unit PM 803F
PM 803F 3BDH000530R1
Base Unit 16 MB, battery-buffered RAM
Without operating system. The operating system has to be loaded during
software installation.
With special Contact Ledge RW 855F.
Software V7.1SP2a or higher is mandatory.
Restrictions: The performance of PM 803F is 5 – 10% below the performance
of PM 802F (Classic).