G3 compliant components are protected with a special coating against corrosive gases. The following Freelance ISA71.04 G3 compliant components can be ordered under the same conditions as any ordinary Freelance component. G3 compliance for AC 800F requires exclusively use of –Z components. AM 810F-Z serves for closing unused slots and the behind system plug.

G3 compliant components are identified by “Z“ added to the module name, for example AC 800FZ-4 MB.

Base units

PM 803F-Z 3BDH000530Z1

• Base Unit 16 MB, battery-buffered RAM
• Coated and G3 compliant version.
• Without operating system. The operating system has to be loaded during software installation.
• With special Contact Ledge RW 855F.
• Software V7.1SP2a or higher is mandatory.
• Restriction: The performance of PM 803F-Z is 5 to 10% below theperformance of PM 802F-Z (Classic).

SA 811F-Z 3BDH000013Z1

• Power Supply 115/230 VAC
• Coated and G3 compliant version.
• To use together with PM 802F-Z or PM 803F-Z.
• Software V7.1SP2a or higher is mandatory.

SD 812F-Z 3BDH000014Z1

• Power Supply 24 VDC
• Coated and G3 compliant version
• To use together with PM 802F-Z or PM 803F-Z
• Software V7.1SP2a or higher is mandatory

EI 813F-Z 3BDH000022Z1

• Ethernet Module 10BaseT (Twisted pair)
• Coated and G3 compliant version.
• To use together with PM 802F-Z or PM 803F-Z.
• Battery not included.
• Software V7.1SP2a or higher is mandatory

FI 810F-Z 3BDH000030Z1

• Fieldbus Module, 3 channel CAN module
• Coated and G3 compliant version.
• To use together with PM 802F-Z or PM 803F-Z for rack I/O.

FI 820F-Z 3BDH000031Z1

• Fieldbus Module, Serial (2 channel)
• Coated and G3 compliant version
• To use together with PM 802F-Z or PM 803F-Z.

FI 830F-Z 3BDH000032Z1

• Fieldbus Module, PROFIBUS-DP
• Coated and G3 compliant version
• To use together with PM 803F-Z.

FI 840F-Z 3BDH000033Z1

• Fieldbus Module, FF HSE
• Coated and G3 compliant version.
• To use together with PM 803F-Z.
• Software V7.1SP2a or higher is mandatory

AM 810F-Z 3BDH000030Z1

• Cover Module
• G3 compliant station assembly requires AM 810F-Z for covering unused
  slots

AM 811F-Z 3BDH000050Z1

• Battery Module
• Coated and G3 compliant version.
• To use together with PM 803F-Z Without battery SB 808.
• Software V7.1SP2a or higher is mandatory.

SY 809F 3BDH000042R1

• Battery Holder
• Without battery SB 808F.

SB 808F 3BDM000199R1

• Battery for RAM buffering, 2 pcs.