description

The 3300 XL 25mm sensor system consists of a separate 25mm probe, one stick

The extension cable consists of a 3300 XL 25mm preloader. 0.787 V/mm (20

mV/mil) output gives the system a linear range of 12.7 mm (500 mils). Based on

This linear range, 3300 XL 25mm sensor system is suitable for

Measurement of turbine rotor and machine stator (casing) of medium to large turbo-generator

The difference between the growth rate caused by the inflation difference (DE). Measuring the expansion difference (DE) The expansion difference is measured by observing the shaft ring or ramp at a certain distance from the thrust bearing with two proximity sensors. typical

The transducer installation layout is:

• Both transducers observe the same side of the shaft ring.

• Two complementary input sensors observe opposite sides of an object

The collar effectively doubles the measurable DE range.

Ordering information

3300 XL 25mm Access Probe:

330851-AXX-BXXX-CXXX-DXX-EXX-FXX

A: Probe housing type options

Note: The standard housing type is 01

To 04. 0

1 1¼ -12 thread

0 2 M30x2 thread

0 3 Smooth 1.06 “Diam. – Rear outlet

0 4 Smooth 1.06 “Diam. – Side outlet

0 5 1½ -12 threads

0 6 M39x1.5 thread

0 7 Smooth 1.5 “Diam. – Rear outlet

0 8 Smooth 1.5 “Diam. – Side outlet

B: No thread length option

Note: Standard unthreaded length is 0.0 mm or 0.0 in. Non – standard thread length

There is an extra charge. The unthreaded length must be at least 26

Millimeters or 1.0 inches is less than the length of the case. For smooth case probe types,

The unthreaded length option is 0.0 inches. Metric case type: Order in 2mm increments. Max. Length Without Thread: 224 mm Min. Length without thread: 0 mm Example: 0 50 = 50 mm Inch Case Type: Order in 0.1 inch increments Max. Length without thread: 8.9 inch Min. Length without thread: 0.0 inch Example: 0 2 5 = 2.5 in. C: Total case length option

Note: Standard case lengths for metric cases are 26, 40, 60, 80, 100

And 250mm, the standard case length of the inch case is

1.0, 2.0, 3.0, 4.0 and 9.9 inches

.

Non-standard case lengths cost extra.

Metric watch case

Type:

Order in 2mm increments

Maximum case

Length:

250mm

Minimum case

Length:

26mm

Example:

0, 5, 0 is 50 millimeters

Imperial sum

Smooth case

Type:

Order in 0.1 inch increments

Maximum case

Length:

9.9″

Minimum case

Length:

1.0 inch (side outlet housing

Type is 1.5 inches)

Example:

0, 2, 0 is 2.0 in

D: Total length option

1 0 1.0 m (3.3 ft)

5 0 5.0 m (16.4 ft)

9 0 9.0 m (29.5 ft)

Note: The five meter probe is designed for

Five-meter preprocessor sensor

The only one.

E: Armor option

0 0 No armor

0 1 with stainless steel armor

Note: When ordering stainless steel armor,

Minimum probe length is 28 mm or 1.1

Inches.

F: Agency approval option

0 0 None Approved

0 5 Multiple approvals

Note: In order to shorten delivery time, please order

Multiple approvals for standing stock

Probe. Currently, inventory probes include

The following part numbers:

330851-01-000-10-00-020-05

330851-01-000-10-00-030-05

The 330851-02-000-10-00-040-05

The 330851-02-000-10-00-080-05

330851-04-000-015-10-00-05

The 330851-04-000-020-10-00-05

3300 XL 25 mm preloader

330850-AXX-BXX

A: Total length and installation options

5 0 5.0 m (16.4 ft) system

Length, panel mount

5 1 5.0 m (16.4 ft) system

Length, DIN mounting

90 9.0 m (29.5 ft) system

Length, panel mount

9 1 9.0 m (29.5 ft) system

Length, DIN mounting

B: Agency approval option

0 0 None Approved

0 5 Multiple approvals

3300 XL 25mm extension cable

330854-AXXX-BXX-CXX

Note: Make sure to extend the cable

Length and probe length plus

Together equals the total of precursors

The length.

A: Cable length option

0 4 0 4.0 m (13.1 ft)

0 8 0 8.0 m (26.2 ft)

B: Armor and cable options

2 4 High temperature FluidLoc

cable

2 5 armor high temperature

FluidLoc cable

C: Agency approval option

0 0 None Approved

0 5 Multiple approvals