Product Overview:

The PFCL201CE 50KN is a vertical weighing measurement module for the steel industry with high precision, stability and reliability.
The product uses Pressductor® magnetoeffect technology and is based on a principle patented in 1954, according to which the magnetic properties of steel are affected by mechanical forces.
The product is made of a single piece of stainless steel, very strong, can be installed under the bearing seat, the vertical component can be measured, can be measured in both directions.

Technical parameters:

Nominal load: 50.0kN or 11250 Lbs..
Extended load: 75.0 kN or 16,875 Lbs..
Permitted load: 25.0 kN or 5625 Lbs., at lateral (horizontal) h=300 mm.
Overload capacity: 500.0 kN or 112,500 Lbs. In the measurement direction (vertical), 20.0 kN or 4500 Lbs. In the lateral direction (horizontal) h=300 mm.
Deflection: 0.02 mm or 0.8/1000 inch.
Spring constant: 2500 kN/mm or 14300 1000 Lbs./inch.

Features:

The product can adapt to a variety of harsh working environments and provide reliable measurement results.
With a variety of input and output interfaces, you can connect a variety of sensors and actuators to achieve real-time data acquisition and device control.
Support a variety of communication protocols, such as Modbus, Profibus, etc., to facilitate data exchange and collaboration with other devices or systems.

Application scenario:

Ideal for rolling mills and treatment lines (such as annealing, pickling, galvanizing, etc.).
Designed for strip tension measurement, in these applications it is necessary or advantageous to determine the vertical component force.