中文版
DS200TCDAG1ACA Digital I/O module
The DS200TCDAG1ACA is a digital I/O board that is part of the GE Speedtronic Mark V gas turbine control system and contains a microprocessor and multiple programmable read-only memory (PROM) modules. It also comes with a 10-LED light block and two 50-pin connectors. The GE digital I/O board DS200TCDAG1ACA also has eight jumpers and a
DS200TCDAG1A Digital I/O board
DS200TCDAG1A product description The General Electric digital I/O board DS200TCDAG1A has a microprocessor and several programmable read-only memory (PROM) modules. It also contains a module consisting of 10 LED lights and a pair of 50-pin connectors. The GE digital I/O board DS200TCDAG1A is also fitted with 8 jumpers and 1 green LED visible from the
DS200TCCBG8BED Turbine expansion simulation plate
GE I/O TC2000 analog board DS200TCCBG8BED has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The microprocessor is a 16-bit microprocessor that manages the running of
DS200TCCBG8B Extended analog I/O board
The DS200TCCBG8B is a general purpose extended analog IO board manufactured and designed by General Electric as part of the Mark V series for Speedtronic gas turbine control systems. The DS200TCCBG8B Universal Extended Analog I/O Board (TCCB) scales and adjusts additional analog I/O signals read from the TCEB board in the P1 kernel and the
DS200TCCBG3BED Analog drive system
GE I/O TC2000 analog board DS200TCCBG3BED has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. There are also five 34-pin connectors on the board. Since multiple
DS200TCCBG3BDC Analog drive system
General Electric I/O TC2000 analog board DS200TCCBG3BDC has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The 80196 microprocessor is a 16-bit device in a ceramic
DS200TCCBG3BCB Analog board Mark V
Jumper switches (J1 to J5) control the line current monitoring and generator/bus voltage monitoring functions on the DS200TCCBG3BCB board. Jumpers are also used to connect RS232 serial ports to DCOM (J14) and for testing (J15 and J16). The GE manual will provide additional information on jumper setup. [caption id="attachment_21151" align="aligncenter" width="550"] DS200TCCBG3BCB[/caption] DS200TCCBG3BCB board is
DS200TCCBG3B The expansion card simulates I/O
The DS200TCCBG3BCB is a board assembly in the GE Mark V turbine control system used as a general purpose extended analog I/O board. The board provides adjustment and scaling for analog I/O signals from the TBCB board. The board is located in the <r5> kernel.</r5> It also reads signals from the TCEB board located in