Yearly Archives: 2022

DS200TCCBG2A I/O expander

GE I/O TC2000 analog board DS200TCCBG2A has an 80196 microprocessor and several PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The PROM module stores the firmware and programming instructions of the

DS200TCCBG1B Simulate I/O

The General Electric I/O TC2000 analog board DS200TCCBG1B has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The board is also equipped with three jumpers. The

DS200TCCBG1ANE Extended simulation module

GE I/O TC2000 analog board DS200TCCBG1ANE has an 80196 microprocessor and several PROM modules. The DS200TCCBG1ANE also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. Leds can be used to indicate whether the board is

DS200TCCBG1ALD Extended analog I/O

DS200TCCBG1ALD Configuration: Hardware: The Mark V LM's generator and bus voltage monitoring capabilities, as well as line current monitoring capabilities, are provided by hardware jumpers J1, J2, J3, J4 and J5. The RS232 serial port is connected to the DCOM through the hardware jumper J14. J15 and J16 are the hardware jumpers used for testing.

DS200TCCBG1A Extended analog I/O card

GE I/O TC2000 analog board DS200TCCBG1ALD has an 80196 microprocessor and several PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The PROM module stores the configuration file of the microprocessor and

DS200TCCAG2B I/O analog board

GE I/O TC2000 analog board DS200TCCAG2B has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The GE I/O TC2000 analog board DS200TCCAG1B is also equipped with

DS200TCCAG1B Gas turbine control

GE I/O TC2000 analog board DS200TCCAG1B has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. The GE I/O TC2000 analog board DS200TCCAG1B is also equipped with

DS200TCCAG1A Transducer module

GE I/O TC2000 analog board DS200TCCAG1A has an 80196 microprocessor and multiple PROM modules. It also contains an LED and 2 50-pin connectors. The LED is visible from the side view of the board. The ID of the 50-pin connector is JCC and JDD. Because the GE I/O TC2000 analog board DS200TCCAG1A is equipped with

DS200TBSAG1AAA Printed circuit board

The DS200TBSAG1AAA is part of a variety of printed circuit boards developed as internal components of the Speedtornic Mark V Series industrial power generation turbine system. The MK V is one of a series of industrial turbine control systems from General Electric. The unit is one of the printed circuit boards designated as LM transducer