中文版
3BHB003154R0101 3BHL000389P0104 IGCT module
Classification of IGCT In terms of internal structure, IGCT can be divided into the following three categories: (1) Asymmetric It is a pure PNPN thyristor structure. The device can withstand high voltage in the forward direction, but it does not have the ability to withstand reverse voltage and cannot flow through reverse current. It is
DEIF SCM-1 Measurement module
The SCM-1 module consists of three boards connected by an eight wired bus on the front side (not the backplane bus). The boards for SCM-1 are named SCM-A, SCM-B and SCM-C and these names can be found on the boards. SCM-A board: Two relay-boards OPR-1 can be mounted. One for output for a mechanical speed
ABB CI627 3BSE008799R1 AF100 Communication Interface
S600 I/O for Advant Master DCS Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160. The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. There is a full complement of
ABB PM633 3BSE008062R1Processor Module
S600 I/O for Advant Master DCS Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160. The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. There is a full complement of
ABB SC610 3BSE001552R1 Submodule Carrier
Product ID:3BSE001552R1 ABB Type Designation:SC610 Catalog Description:SC610 Submodule Carrier Long Description:Advant Controller 100 Series carrier module. Required for connection of CI532. Two CI532 fit into one carrier. Note! This part is exempted from the scope of 2011/65/EU (RoHS) as provided in Article 2(4)(c), (e), (f) and (j) therein (ref.: 3BSE088609 – EU DECLARATION OF CONFORMITY
ABB RF615K01 3BSE000650R1 I/O Station with single CI610
Product ID:3BSE000650R1 ABB Type Designation:RF615K01 Catalog Description:RF615K01 I/O Station with single CI610 Long Description:S600 I/O Bus Extension Kit including: 1 pc RF615 Base Backplane 10 slots 1 pc RC610 Cable Duct 1 pc CI610 IOB_A Bus Extender for Basic Unit Note! This part is exempted from the scope of 2011/65/EU (RoHS) as provided in Article
ABB DO620 3BHT300009R1 Digital Output 32ch, 60VDC
S600 I/O for Advant Master DCS Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160. The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. There is a full complement of
ABB AO610 3BHT300008R1 Analog Output 16ch, 12bit
S600 I/O for Advant Master DCS Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160. The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. There is a full complement of