中文版
Motorola MVME147 Serie
The MVME147 was tested in an FCC-compliant chassis, and meets the requirements for Class A equipment. FCC compliance was achieved under the following conditions: 1. Shielded cables on all external I/O ports. 2. Cable shields connected to earth ground via metal shell connectors bonded to a conductive module front panel. 3. Conductive chassis rails connected
Motorola MVME 141 Serie
Features: Single-Slot VME Module MC68030 32-Bit Microprocessor Reset / Abort Control Functions Front Panel LED Status Indication The Emerson / Motorola MVME141 Single Board Computer is a single slot VME Module with a MC68030 32-bit 33.3 MHz Micoprocessor. This SBC has front panel LED status indication and Reset / Abort control functions. Configuration: • Processor:
Motorola MVME136 Series
Features: MC68020 Virtual Memory Microprocessor with 32-Bit Address and Data On Board Socket for MC68881 Floating Point Coprocessor (FPCP) Multi-Master VME Subsystem Bus (VSBbus) Interface VMEbus Interface VMEbus Interrupt Handler Z8036A Programmable Timer Module Periodic Tick Interrupt The Emerson / Motorola MVME135 / MVME136 Series are high performance MC68020 microprocessor based modules implemented on a
Motorola MVME135 Series
MVME135/136 is a high-performance MC68020 microprocessor module based on the VME double-height, single-width form factor. MVME135/136 contains MC6802032 address and data microprocessor advanced multiprocessor CSR and fast DRAM of IMB or 4MB. Other key features provided include Demand Paged Memory Management Unit (PMMU), FioatingPoint Coprocessor (FPCP), and interfaces to VMEbus and VSBbus. The MVME135/136 is
Motorola MVME134 Series
Emerson / Motorola MVME134 32-Bit Monoboard Microcomputer Configuration: • 16.67 MHz MC68020 Processor • 4 MB DRAM Memory • 2 KB SRAM Memory Part Number: 01-W3471B B02B Features: 4MB of Shared Local DRAM (3) 8-Bit Programmable Timers for Tick and Watchdog Functions MC68020 Microprocessor with 32-Bit Address and 16.67MHz (20.00MHz for MVME134FP) MC68851 Paged Memory
Motorola MVME133 series
The MVME133 is specified, designed and tested to operate reliably over an intake air temperature range of 0C to 55C with forced air cooling at speeds typically achievable by a 71CFM axial fan. Temperature qualification is performed in a standard Motorola VME Systems chassis. Twenty-five watt load boards were inserted into two card slots, one
Vibro-meter VM600 IOC4T input/output card for MPC4 cards
VM600 IOC4T input/output card for MPC4 cards Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels Differential signal input with sensor power supply output per dynamic channel and per tachometer channel Differential buffered (raw) transducer output per dynamic channel DC output configurable as current-based signal (4
Vibro-meter VM600 CPUR2 rack controller and communications interface card
VM600 CPUR2 rack controller and communications interface card VM600 CPUR2/IOCR2 rack controller and communications interface card pair with support for Modbus TCP and PROFIBUS DP “One-Shot” configuration management of protection cards (MPC4) in a VM600 rack using an Ethernet connection to a computer running the VM600 MPSx and VibroSight® software Mathematical processing of data to