IC693MDL916 GE Series 90-30, relay output module

The IC693MDL916 is a relay output module that is part of the GE Fanuc Series 90-30 Programmable Logic controller. This module is a single-slot width module that features Sixteen (16) individually isolated Form A or Normally Open (N.O.) contacts. Each contact output of this module has maximum output current rating of 4 Amperes and is operable with both AC and DC voltages specifically, 5-125 VDC / 5-250 VAC. The IC693MDL916 is a single slot module that mounts to a series 90-30 baseplate. It consumes a single slot of the and supports functioning as a local and distributed I/O component. Install as many IC693MDL916 modules as needed, limited only by the I/O capability, memory capacity, and available installation slots of the Series 90-30 system. Also, the IC693MDL916 may act as distributed I/O component of the modern PAC system RX3i and RX7i Programmable Automation Controller (PAC) platform. The IC693MDL916 has a backplane power consumption of 300 mA from the 5VDC backplane. It requires the use of a High-Density Terminal Block. With individually isolated contact outputs, maximum operation flexibility can be achieved as mixing of DC and AC signals is allowed. The maximum switching frequency of each contact output channel is 20 cycles per minute. Provided with the module are DIP switches that are used to configure the module’s reaction when the CPU transitions to Stop mode. In addition, the module’s default mode set via the DIP switch must be the similar to configuration created in the programming software. Compatible connectors for use with this module are IC694TBBx32 or IC694TBSx32.