VME-PROF-S 029.363 054 independent PROFIBUS-DP-Slave interface module

Status display: 6 status leds for displaying the status of the board and PROFIBUS.
Dimensions: VME-PROF-S is 6HE-4TE (3HE board and 6HE front panel), VME-PROFS3 is 3HE-4TE (single European format, 160x100mm).
Power requirements: +5V, typical 800 mA, no +5V standby, no +12V and -12V.
Operating temperature: 0… Plus 50 °C.
Storage temperature: -25… Plus 70 °C.
What’s included: VME-PROF-S board (including DPS firmware stored in Flash-EPROM), floppy disk with ANSI-C demonstration program and GSD file (PC1.44 format), and technical manual.
Safety precautions: The device can only be used in a VMEbus compliant sub-rack and can only be turned on after installation. You must disconnect the device from the VCC power supply before connecting or disconnecting the hardware interface.

Category:

Description

VME-PROF-S 029.363 054 independent PROFIBUS-DP-Slave interface module

Product Description

VME-PROF-S 029.363 054 is an independent PROFIBUS-DP-Slave interface module that is installed on the VMEbus board. The following are the detailed features and parameters of the product:

PROFIBUS-DP-Slave interface: Supports 12 Mbaud PROFIBUS-DP-Slave interfaces.
Based on SPC3 ASIC: The first and second layers of the PROFIBUS protocol are processed using SPC3 ASIC (DIN 19245 / EN 50170).
VMEbus interface: Has 64 KB of dual-port RAM as the data interface for VMEbus.
Firmware: With PROFIBUS-DP-Slave Firmware (DPS), an independent and arbitrarily configurable DP-Slave interface is built.
Configuration: The slave is configured with dual-port RAM and can use up to 32 configuration bytes, 244 input bytes and 244 output bytes, and the total amount of input/output data can be 400 bytes.

VME-PROF-S

Product parameter

Status display: 6 status leds for displaying the status of the board and PROFIBUS.
Dimensions: VME-PROF-S is 6HE-4TE (3HE board and 6HE front panel), VME-PROFS3 is 3HE-4TE (single European format, 160x100mm).
Power requirements: +5V, typical 800 mA, no +5V standby, no +12V and -12V.
Operating temperature: 0… Plus 50 °C.
Storage temperature: -25… Plus 70 °C.
What’s included: VME-PROF-S board (including DPS firmware stored in Flash-EPROM), floppy disk with ANSI-C demonstration program and GSD file (PC1.44 format), and technical manual.
Safety precautions: The device can only be used in a VMEbus compliant sub-rack and can only be turned on after installation. You must disconnect the device from the VCC power supply before connecting or disconnecting the hardware interface.

Application field

Industrial automation: In automated production lines, robot control, automated assembly lines, etc., VME-PROF-S can be used to connect and control various sensors, actuators and other automation equipment.

Process control: In process control applications in the chemical, oil, gas, pharmaceutical and other industries, VME-PROF-S can be used to monitor and control process variables such as temperature, pressure, flow, etc.

Energy management: In the field of energy management, such as electricity and water treatment, VME-PROF-S can be used for data acquisition, condition monitoring and equipment control to optimize energy use and reduce costs.

Traffic control: In the field of traffic control such as rail transit, port automation, VME-PROF-S can be used for signal control, vehicle monitoring and safety systems.

Building automation: In an intelligent building management system, VME-PROF-S can be used to integrate lighting, air conditioning, security and elevator systems within a building for centralized monitoring and control.

Data Acquisition and Monitoring System (SCADA) : VME-PROF-S can be used as a component in a SCADA system to remotely monitor and control equipment and processes in different locations.

Research and Development: In an R&D environment, VME-PROF-S can be used for rapid prototyping and testing to validate new control algorithms and system concepts.

Other related product recommendations:

MVI56-ADM  Prosoft  Programmable Application Development Module
BMXCPS2010  Schneider  Standard power module
BMXDDO6402K  Schneider  discrete DC output module
BMXDDI3202K  Schneider  discrete input module
PCI-6221  779066-01  Multifunction I/O Device
SHC68-68-EPM  NI  Multifunctional cable
05701-A-0361  Backplane Serial communication controllers and monitors
AI03  ABB   AI module  2-3-4 Wire RTDs
AI02J  ABB   AI module  2-3-4 Wire RTDs
IOC-555-D 17-550555-001  GE  Electronic components
PC834-001-T  PACIFIC SCIENTIFIC Brushless Servo Drive
8440-1666 B  SPM-D11/LSXR features 12/24 VDC power supply
IC670ALG310  GE  voltage-source analog output module
PM866K01 3BSE050198R1  AC800M processor unit
81001-340-71-R  Allen Bradley  Inverter processing module
PXI-8423  NI  PXI-8423/2 RS-485 Interface
AD02  ABB   AI module  2-3-4 Wire RTDs
MVME55006E-0163  MOTOROLA  VMEbus Single-Board Computer
531X301DCCAFG2  GE  DRIVE CONTROL BOARD
A6370D  Emerson  A6370 Overspeed Protection Monitor
1715-TASOB8DE  Allen Bradley  termination assembly
4PP065.0571-X74F  Power Panel PP65
2094-BC02-M02   Kinetix 6000 Integrated Axis Module (IAM)
MVI56E-MCM  ControlLogix series communication module
1769-L32E  CompactLogix Modular controller
DI810  16  Digital Input  module

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com