S72402-NANANA-NA-030 S700 Digital Servo Amplifier

Other use than described in chapter 2.2 is not intended and can lead to damage of persons, equipment or things.
The use of the servo amplifier in the following environments is prohibited:
– potentially explosive areas
– environments with corrosive and/or electrically conductive acids, alkaline solutions, oils, vapors, dusts
– directly on non-grounded supply networks or on asymmetrically grounded supplies with a voltage >240V.
– on ships or off-shore applications
Commissioning the servo amplifier is prohibited if the machine in which it was installed,

Add to quote
Category:

Description

S72402-NANANA-NA-030 S700 Digital Servo Amplifier

Product description

Other use than described in chapter 2.2 is not intended and can lead to damage of persons, equipment or things.
The use of the servo amplifier in the following environments is prohibited:
– potentially explosive areas
– environments with corrosive and/or electrically conductive acids, alkaline solutions, oils, vapors, dusts
– directly on non-grounded supply networks or on asymmetrically grounded supplies with a voltage >240V.
– on ships or off-shore applications
Commissioning the servo amplifier is prohibited if the machine in which it was installed,
– does not meet the requirements of the EC Machinery Directive
– does not comply with the EMC Directive or with the Low Voltage Directive
– does not comply with any national directives
The control of holding brakes by the S700 alone may not be used in applications, where functional safety is to be ensured with the brake.

S72402-NANANA-NA-225-

Product parameter

Features

  • CE, UL, TÜV safety tested
  • Operation directly from grounded 110 to 480 VAC, 1 or 3-phase, 50 to 60 Hz lines
  • Models with maximum continuous output current from 1.5 to 72 Amps RMS/phase
  • Safe Torque Off (STO) function onboard
  • EtherCAT® and CANopen bus communication onboard
  • Legacy bus support including PROFINET, DeviceNet, PROFIBUS DP, SERCOS II and RS232
  • Single Cable Feedback SFD3 and Hiperface DSL
  • Slot for MMC memory card for backup and copy of parameters and firmware
  • Optimized resolver interface
  • Autotuning
  • Cogging suppression
  • Fastest feedback evaluation on the market

Benefits

  • High-speed current, speed and position control result in higher machine cycle rates
  • IEC 61131 macro programming language inside makes motion flexible
  • Multi-interface and multi-feedback features provide compatibility with all standard controllers and feedback systems, reducing the need to stock multiple drive types
  • Onboard EMC filters and integrated power supply and brake resistor enable smaller switchgear cabinets
  • Memory card for parameter and firmware updates, autotuning features and connectors for all connections facilitate faster setup

Application field

Storage
Storage only in the manufacturer’s original recyclable packaging
Max. stacking height: 8 cartons
Storage temperature: -25 to +55°C, max. rate of change 20K / hour,
class 1K4 acc. to EN61800-2, EN 60721-3-1
Storage humidity: 5 … 95% relative humidity, no condensation,
class 1K3 acc. to EN61800-2, EN 60721-3-1
Storage duration:
Less than 1 year: without restriction.
More than 1 year: capacitors must be re-formed before setting up and operating the
servo amplifier. To do this, remove all electrical connections and apply single-phase
230V AC for about 30 minutes to the terminals L1 and L2.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Related products