中文版
Description
783761-01 PXIE-4139 Source Measure Unit (SMU)
Product Description
783761-01 is the product number of the PXIe-4139 Source Measure Unit (SMU) manufactured by National Instruments. The following is the detailed product information of the PXIe-4139:
Description: The PXIe-4139 is a ±60 V, 3A precision system PXI source measurement unit for test and measurement applications requiring high accuracy and resolution.
Voltage and current range:
Voltage range: 600 mV, 6 V, 60 V
Current range: 1 μA to 10 A (pulse mode)
Accuracy and resolution:
Voltage resolution (noise limit) : varies depending on the voltage range
current accuracy: ±(% of current + offset)
voltage accuracy: ±(% of voltage + offset)
Noise: Broadband source noise in the 60 V range less than 20 mV peak-to-peak (typical)
Output resistance programming accuracy: varies according to current level/limit range
Transient response and stability time: varies according to the transient response speed of the device configuration
Load regulation: When the device is configured for local or remote sensing, load regulation effects are included in the voltage and current accuracy specifications
Remote sensing: Voltage accuracy requires an additional 3 ppm per volt of HI lead drop plus 1 μV per volt of lead drop multiplied by the Ω of the corresponding induction lead resistance
Protection: The output channel protection includes automatic shutdown of over current or over voltage and automatic shutdown of over temperature
Isolation: Channel to ground isolation voltage, continuous 150 VDC, withstand 1,000 VRMS
Trigger characteristics: Support a variety of trigger types, including source completion, sequence iteration completion, sequence engine completion, measurement completion, pulse completion, and ready pulse
Calibration interval: The recommended calibration interval is 1 year
Power requirements: PXI Express power requirements require 2.5A from 3.3V track and 2.2A from 12V track
Physical size: 3U, single slot, PXI Express/CompactPCI Express module 2.0cm × 13.0cm × 21.6cm
Environmental Conditions:
Operating ambient temperature range: 0 °C to 55 °C
Storage environment temperature range: -40 °C to 70 °C
Relative humidity range: 10% to 90%, non-condensing
Compliance and certification: Products comply with safety compliance standards such as IEC 61010-1, UL 61010-1, CSA C22.2 No. 61010-1, as well as electromagnetic compatibility standards such as EN 61326-1, EN 55011, EN 55022.
Due to its high accuracy and versatility, the PXIe-4139 source measurement unit is suitable for a variety of test and measurement applications, including semiconductor testing, battery testing, sensor testing, and more.
PXIE-4139
Product parameter
Product model: PXIe-4139
Product Number: 783761-01
Voltage range:
600 mV
6 V
60 V
Current range:
1 μA to 10 A (pulse mode)
Up to 3 A in continuous mode
Voltage resolution: varies according to the voltage range and is limited by noise
current accuracy: ±(% of current + offset)
voltage accuracy: ±(% of voltage + offset)
Noise: Broadband source noise in the 60 V range less than 20 mV peak-to-peak (typical)
Output resistance programming accuracy: varies according to current level/limit range
Transient response and stability time: varies according to the transient response speed of the device configuration
Load regulation:
Voltage: 100 μV per mA output load variation when the device is configured for local induction (measured between output channel terminals)
Current: When the device is configured for local or remote induction, the load regulation effect is included in the current accuracy specification
Remote sensing: Voltage accuracy requires an additional 3 ppm per volt of HI lead drop plus 1 μV per volt of lead drop multiplied by the Ω of the corresponding induction lead resistance
Protection:
Output channel protection: over current or over voltage automatically closed, output disconnect relay open
Overtemperature protection: automatic off, output disconnect relay open
Isolation:
Channel to ground isolation voltage: continuous 150 VDC, withstand 1,000 VRMS
Trigger characteristics: Support a variety of trigger types, including source completion, sequence iteration completion, sequence engine completion, measurement completion, pulse completion, and ready pulse
Calibration interval: The recommended calibration interval is 1 year
Power requirements: PXI Express power requirements require 2.5A from 3.3V track and 2.2A from 12V track
Physical size: 3U, single slot, PXI Express/CompactPCI Express module 2.0cm × 13.0cm × 21.6cm
Environmental Conditions:
Operating ambient temperature range: 0 °C to 55 °C
Storage environment temperature range: -40 °C to 70 °C
Relative humidity range: 10% to 90%, non-condensing
Application field
The PXIe-4139 Source Measurement Unit (SMU) has a wide range of applications, including but not limited to:
Semiconductor testing: Used to test the electrical parameters of semiconductor devices, such as voltage-current characteristics.
Electronic component test: Test the performance of electrical components such as resistors, capacitors and inductors.
Battery testing: Evaluate the charge-discharge characteristics of a battery, including voltage, current, and capacity testing.
Sensor testing: Accurately measure the response characteristics of sensors, such as temperature, pressure, light sensors, etc.
Material research: Study the electrical properties of new materials, such as electrical conductivity, resistivity, etc.
Education and research: Used in teaching and research experiments in universities and research institutes to provide precise voltage and current control.
Automated test systems: Integrated into automated test systems for product quality control and performance verification.
Aerospace: In the aerospace field, electronic systems and components used to test and verify aircraft.
Automotive electronics: Used to test the reliability and performance of automotive electronic components, such as sensors, actuators, etc.
Medical Device testing: To ensure the safety and accuracy of medical devices under specific voltage and current conditions.
The PXIe-4139 is an indispensable tool in a variety of test and measurement applications due to its high accuracy, versatility and reliability.
Other related product recommendations：
| MVI56-ADM Prosoft Programmable Application Development Module |
| BMXCPS2010 Schneider Standard power module |
| BMXDDO6402K Schneider discrete DC output module |
| BMXDDI3202K Schneider discrete input module |
| PCI-6221 779066-01 Multifunction I/O Device |
| SHC68-68-EPM NI Multifunctional cable |
| 05701-A-0361 Backplane Serial communication controllers and monitors |
| AI03 ABB AI module 2-3-4 Wire RTDs |
| AI02J ABB AI module 2-3-4 Wire RTDs |
| IOC-555-D 17-550555-001 GE Electronic components |
| PC834-001-T PACIFIC SCIENTIFIC Brushless Servo Drive |
| 8440-1666 B SPM-D11/LSXR features 12/24 VDC power supply |
| IC670ALG310 GE voltage-source analog output module |
| PM866K01 3BSE050198R1 AC800M processor unit |
| 81001-340-71-R Allen Bradley Inverter processing module |
| PXI-8423 NI PXI-8423/2 RS-485 Interface |
| AD02 ABB AI module 2-3-4 Wire RTDs |
| MVME55006E-0163 MOTOROLA VMEbus Single-Board Computer |
| 531X301DCCAFG2 GE DRIVE CONTROL BOARD |
| A6370D Emerson A6370 Overspeed Protection Monitor |
| 1715-TASOB8DE Allen Bradley termination assembly |
| 4PP065.0571-X74F Power Panel PP65 |
| 2094-BC02-M02 Kinetix 6000 Integrated Axis Module (IAM) |
| MVI56E-MCM ControlLogix series communication module |
| 1769-L32E CompactLogix Modular controller |
| DI810 16 Digital Input module |
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
