AVME9668 VMEbus 6U Non-Intelligent Carrier Boards

Description

AVME9668 VMEbus 6U Non-Intelligent Carrier Boards

Interface for Four IP Modules – Provides an electrical and
mechanical interface for up to four industry standard IP
modules. IP Modules are available from Acromag and other
vendors in a wide variety of Input/Output configurations to
meet the needs of varied applications.
• Provides Full IP Data Access – Supports accesses to IP
input/output, memory, and ID PROM data spaces.
• Full IP Register Access – Makes maximum use of logically
organized programmable registers on the carrier boards to
provide for easy configuration and control of IP modules.
The only hardware jumper settings required on the carrier
boards set the base address of the card in the VMEbus short
I/O space.
• LED Displays Simplify Debugging – On board LED’s are
dedicated to each IP module to give a visual indication of
successful IP accesses.
• Front Panel Connectors Access I/O – Front panel access
to field I/O signals is provided via industry standard 50-pin
headers. A separate header is provided for each IP module.
All IP module I/O signals can be connected to SCSI-2 cables
from the front panel without interference from boards in
adjacent slots.

AVME9668

Optional Screw Termination Panel – Model supports field
connection via screw terminals using the optional DIN rail
mount termination panels.
• Memory Space Access Support – IP memory space
accesses are supported and software configurable from
1Mbyte to 8Mbytes in the VMEbus standard address space.
• Supports Two Interrupt Channels per IP – Up to two
interrupt requests are supported for each IP. The VMEbus
interrupt level is software programmable. Additional
registers are associated with each interrupt request for
control and status monitoring.
• Supervisory Circuit for Reset Generation – A
microprocessor supervisor circuit provides power-on, poweroff, and low power detection reset signals to the IP modules
per the IP specification.
• Individually Fused and Filtered Power – Fused and filtered
+5V, +12V, and -12V DC power is provided to the IP
modules via passive filters present on each supply line
serving each IP. This provides optimum filtering and
isolation between the IP modules and the carrier board and
allows analog signals to be accurately measured or
reproduced on IP modules without signal degradation from
the carrier board logic signals.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com