Consilium Nsac-1  Fire Alarm System

The different parts of the CS4000 fire alarm system, the central unit, the control units, repeaters and the loop units, should first be mechanically
installed. The different loop units are thereafter electrically installed and set up according to the definition of the loops. The cables must be tested
separately before the loops are connected to the central unit. This eliminates any problem with the cable and the electrical installation of
the loop units. The installation is completed with the electrical installation of the central unit and the control unit(s).
Category:

Description

Consilium Nsac-1  Fire Alarm System

The different parts of the CS4000 fire alarm system, the central unit, the control units, repeaters and the loop units, should first be mechanically
installed. The different loop units are thereafter electrically installed and set up according to the definition of the loops. The cables must be tested
separately before the loops are connected to the central unit. This eliminates any problem with the cable and the electrical installation of
the loop units. The installation is completed with the electrical installation of the central unit and the control unit(s).
Install the central unit, the control units, repeaters and the loop units according to the drawings. The control unit can be delivered installed in
the central unit or as a separate unit. Separate drawings are delivered with the system.
The central and control unit, even the external control and repeater units, are delivered in cabinets (IP22) for wall or console mounting.
Separate drawings are delivered with the system. The central units shall
be installed indoors in areas with 0- 80% RH non-condensing and temperatures ranging from 0°C to 50°C.

Consilium Nsac-1 

A loop unit is a unit that can be connected to a loop or a conventional zone, i.e. detector, manual call point, address unit, timer etc.
The mechanical installation of the different types of loop and zone units is described on the data sheets respectively.
The length of a loop or a sub-loop depends on the following three parameters, type of cable, shielded or unshielded cable and power
consumtion. A cable is considered to be shielded if the shielded part of the cable is more than 10% of the total length. Never exceed the
recommended cable lengths mentioned below.
The loop units are divided into three types, depending on their individual load on the loop.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “Consilium Nsac-1  Fire Alarm System”

Your email address will not be published. Required fields are marked *

Post comment