AN-X2-AB-DHRIO EtherNet/IP™ to Remote I/O or DH+ Gateway

The AN-X2-AB-DHRIO gateway is designed to help customers initiate a phased migration approach to replace Replace or upgrade a traditional remote I/O PLC, HMI, drive, or Flex I/O adapter. these
The solution can be implemented by selecting the appropriate mode of operation during initial configuration. AN-X2- AB-DHRIO has a built-in Web server that can display diagnostic data, configuration, and on Pass configuration files and set operating modes.
Note: DH+ migration on SLC networks is now supported. Some PLC code changes may be required See TN14326-9001 DH+ to EIP PV migration SLC network. PDF for more Message.

Add to quote
Category:

Description

AN-X2-AB-DHRIO EtherNet/IP™ to Remote I/O or DH+ Gateway

Product description

The AN-X2-AB-DHRIO gateway is designed to help customers initiate a phased migration approach to replace Replace or upgrade a traditional remote I/O PLC, HMI, drive, or Flex I/O adapter. these
The solution can be implemented by selecting the appropriate mode of operation during initial configuration. AN-X2- AB-DHRIO has a built-in Web server that can display diagnostic data, configuration, and on Pass configuration files and set operating modes.
Note: DH+ migration on SLC networks is now supported. Some PLC code changes may be required See TN14326-9001 DH+ to EIP PV migration SLC network. PDF for more Message.

ANC-100E AN-X2-AB-DHRIO

Product parameter

The mode supports upgrading the Allen Bradley remote I/O driver of an earlier version to an EtherNet/IP driver.
• No need to change PLC code
• Supports a maximum of four state network drivers
• 1/4, 1/2 and full rack addressing available
• Support PowerFlex driver to state network communication
Mode The Allen Bradley remote I/O driver of an earlier version can be upgraded to PanelView Plus, PanelView Plus 6, or PanelView
Plus 7 EtherNet/IP.
• No need to change PLC code
• A maximum of eight PanelViews can be configured on the same network segment
• Support DH+ conversion to EtherNet/IP PanelViews on PLC5 or SLC networks
Mode supports upgrading older versions of Allen Bradley remote I/O systems to ControlLogix or CompactLogix series PACs without replacing existing I/O mounts.
• Build new systems without interrupting existing controls, reducing downtime
• Supports up to 32 remote I/O racks
• Supports all remote I/O baud rates (57.6, 115.2, and 230.4 K baud), and remote I/O addresses from 0 to 76
• Compatible with ControlLogix and CompactLogix systems
• Automatically configure software to search for baud rate and assign discrete I/O to reduce configuration risk
Mode Supports protocol conversion between EtherNet/IP and DH+ networks
• Programmable terminals that support EtherNet/IP, or processors capable of connecting to DH+ networks
• Download to PLC5 or SLC via RSLinx
• Configure using a web browser
• Support for all DH+ baud rates (57.6, 115.2, and 230.4 K baud)
• When communication is enabled on the EtherNet/IP side, DH+ information cannot be transferred to the EtherNet/IP side
• Support DH+ conversion to EtherNet/IP PanelViews on PLC5 or SLC networks

Application field

The AN-X2-AB-DHRIO is a communication module that is manufactured by Prosoft Technology, an Allen-Bradley encompass partner company. This communication device is a small and compact device that supports desktop or DIN rail mounting. It allows modern Programmable Automation Controllers (PAC) such as the Allen-Bradley’s ControlLogix and CompactLogix controller to communicate with devices that utilizes the legacy Remote I/O (RIO) and Data Highway Plus (DH+) communication protocols.

The AN-X2-AB-DHRIO comes with One (1) Ethernet I/P communication interface that supports 10/100 mbps data transmission rate. This port connects PAC ports to the gateways while the 3-pin Phoenix network connector available to the AN-X2-AB-DHRIO permits daisy-chain connection of devise such as Allen-Bradley’s PLC, SLC 500, PanelView, Drives and Flex I/O adapter modules. This communication interface supports configurable data transfer rate including 57.6, 115.2, and 230.4 K baud. It also comes with another 3-pin Phoenix connector for termination of an external 24 VDC power supply.

The AN-X2-AB-DHRIO is also provided with a built-in Web server that allows remote monitoring and configuration of this gateway. Other supported operations that can be initiated over the web server are diagnostics data display, configuration, upload configuration files, and setting of the operation mode. This can be done over a standard web browser.

The AN-X2-AB-DHRIO is ideal for use in integration to modern control systems of legacy devices as well as cost-effective migration of mature and obsolete products. It permits continued utilization of these devices without the need of complete replacement, providing customers a flexible and practical alternative solution to existing automation requirements.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Related products