中文版
Description
CE3008 Parameter requirements：
Power requirement Supplied by System Power Supply through 2-wide
Power/Controller Carrier
Fuse protection 3.0 A, non-replaceable fuses
Power dissipation 5.0 W typical, 7.0 W maximum
Mounting On right slot of power/controller carrier.
User Memory 48 MB
CE3008Control Network 8-pin RJ-45 connector
Redundant Control Network 8-pin RJ-45 connector
LED Indicators (ON Status)
Green – Power Indicates DC power is applied.
Red – Error Indicates an error condition.
Green – Active Indicates that the controller is operating as the
primary controller.
Green – Standby Indicates that the controller is operating as a backup
controller (reserved for future use).
Yellow flashing – Pri. CN Indicates valid primary control network
communication.
Yellow, flashing – Sec. CN Indicates valid secondary control network
communication.
All except Power flashing Visual identification of controller initiated from user
interface software by ping command.
All except Power flashing, alternating even and odd Firmware upgrade in progress.
Environmental
Operating temperature -40° to 70° C (-40° to 158° F)
Storage temperature -40° to 85° C (-40° to 185° F)
Relative humidity 5 to 95%, non-condensing
Airborne contaminants ISA-S71.04-1985 Airborne Contaminants Class G3
Conformal coating
Shock (normal operating conditions) 10 g ½-sine wave for 11 ms
Hazardous area/location
Refer to Zone 2 installation instructions (12P2046) and/or
Class 1 Division 2 installation instructions (12P1293) for
information on installing in hazardous areas.
ATEX EEx nA IIC T4
Class 1, Div 2, Groups A, B, C, D, T4
Vibration (operative limit) 1 mm peak-to-peak from 5 Hz to 16 Hz,
0.5 g from 16 Hz to 150 Hz
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
